Marine Applications
The versatility of Liquid Rubber products allow for solutions for the marine industry that are unparalleled. Instant setting, corrosion and chemical resistant coatings offering excellent waterproofing features can be applied across many facets of the marine environment extending the life of structures and facilities while creating a safer and more efficient workplace.
On-shore building roof structures
Liquid Rubber SealRoof B-200™ applied as an ‘instant-setting’ fluid applied membrane provides cost effective waterproofing for all types of roof construction. Sprayed using a high volume – low pressure pump system, contractors can waterproof 500 sq.m. of roof surface per day. The cured Liquid Rubber SealRoof B-200™ membrane resists damage from salt water, acid rain, sun’s ultraviolet radiation and wind.
Liquid Rubber SealRoof A-100™ can be applied as a topcoat over SealRoof B-200™ where an energy efficient colour roof waterproofing membrane is desired.
SealRoof A-100 CreteSafe T-300 CreteSafe A-Primer
On-shore building warehouse flooring
Applied over concrete flooring in process and warehouse facilities, Liquid Rubber SealRoof A-100™ provides a protective wear-resistant coating in a range of colours. Applied over worn flooring Liquid Rubber SealRoof A-100™ fills cracks and damage areas, restoring a new floor look. Where greater traction is required, Liquid Rubber CreteSafe T-300™ containing a ‘grit’ additive, is recommended.
Both coatings are salt and oil resistant. Liquid Rubber CreteSafe A-Primer™ is applied as a topcoat over either Liquid Rubber SealRoof A-100™ or CreteSafe T-300™ enhances resistance to staining and tracking.
CreteSafe B-250 MetalSafe B-300
Metal / concrete retaining walls
Liquid Rubber MetalSafe B-300™ provides excellent adhesion to steel, protecting the surface from corrosion caused by salt and water exposure. Spray applied in the liquid form, it cures producing a fully adhered, seamless membrane conforming to and sealing even the most complex structural shapes.
For protecting concrete retaining walls from water and salt damage, Liquid Rubber CreteSafe B-250™ provides a tough weather resistant membrane which resists damage from the sun’s UV rays. Both products combine ease of application with workplace and environmental safety.
MetalSafe B-300 HighBuild S-200
Mooring bumper structures
Liquid Rubber MetalSafe B-300™ (spray applied) or Liquid Rubber HighBuild S-200™ (brush applied) provide a tough waterproof and corrosion protective coating with excellent elasticity.
SealRoof A-100 CreteSafe T-300 MetalSafe B-300
Vessel cargo hold and bilge liners, and decking surfaces
Liquid Rubber MetalSafe B-300™ applied alone or in combination with Liquid Rubber SealRoof A-100™ provides an excellent corrosion protective liner for cargo holds and bilges. Extensive ASTM testing has shown these coatings resist under-cutting, blistering and peel-back, and are resistant to a wide range of chemical products. Liquid Rubber SealRoof A-100™, and CreteSafe T-300™ are also resistant to swelling in the presence of hydrocarbons.
All Liquid Rubber spray applied liner products feature excellent adhesion and elasticity, allowing the cured coating to bridge small stress cracks in tank surface. For walking surfaces where good traction is required, such as wet and oily decks and companionways, select Liquid Rubber CreteSafe T-300™ – an easy to apply and clean non-skid coating.
SealRoof A-100 MetalSafe B-300
Exterior hull coatings
Applied to the exterior hulls of vessels, Liquid Rubber MetalSafe B-300™ and SealRoof A-100™ protects the metal surface from rust and corrosion and improves maintenance associated with surface fouling. The coatings ability to resist under-cutting, prevents corrosion damage going undetected around damaged surfaces and its low surface tension properties, limits organism growth and makes anti-fouling significantly easier and safer.
SealRoof A-100 CreteSafe T-300 MetalSafe B-300
Off-shore drilling and production platforms
The rubberized and elastic properties of these products combined with their resistance to UV, salt and water damage, make them the ideal choice for metal protection in off-shore drilling and production platforms.
These coatings are easily and safely applied using an airless spray system in the dry dock facility and can be easily repaired at sea, using only a brush or paint roller. Their rubberized nature resists impact damage and facilitates bridging stress cracks and other metal fatigue problems.